| Original Articles |
 147 Mechanochromic Dynamicb Covalent Elastomers:Quantitative Stress Evaluation and Autonomous Recovery
K. Imato, T. Kanehara, T. Ohishi, M. Nishihara, H. Yajima, M. Ito, A. Takahara, H. Otsuka, ACS Macro Letters, 4, 13-7-1311 (2015)
146 Difference in the stability of network between natural rubber and polyisoprene vulcanizates
Masayoshi Ito, Ayaka Takizawa , Kautschuk Gummi Kunststoffe 65, 24-27 (2012)
145 加硫反応過程におけるジエン系ゴムのシスートランス異性化反応に関する研究
吉本洸哉、伊藤眞義 日本ゴム協会誌、85, 87-92 (2012)..
144 シリカがジエン系ゴムの加硫反応に与える影響
秋草拓哉、伊藤眞義、日本ゴム協会誌、84巻, 267-272 (2011)
143 Rupture, orientation and strain -induced crystalization of polymer
chain and network in vulcanized polyisoprene during uniaxial deformation
by in-situ Electron Spin Resonance (ESR) and synchrotron X-ray analysis
Shigeuki Toki, Ryuichi Takagi, Masayoshi Ito, Benjamin S. Hsiao, Polymer,
52 2453-2459 (2011)
142 加硫ゴム材料の伸長変形過程におけるESR情報
高木隆一、伊藤眞義 日本ゴム協会誌、83巻, 311-317 (2010)
141 シリカ充てん加硫ゴム材料の応力軟化に関する研究
内藤陽子、伊藤眞義、日本ゴム協会誌、82巻, 394-399 (2009)
140 ESR Study of Vulcanizates Under the Deformed State
船津淳司、高木隆一、伊藤眞義、J. Appl. Polym. Sci., 113, 2791-2795 (2009)
139 The changes of Transesterification Level in PET/PEN Blends with the Addition of PET-PEN Copolymer
井田慎一郎、山本紘子、伊藤眞義、J. Appl. Polym.Sci., 112, 2716-2723 (2009).
138 PET/PEN/PET-PENコポリマーブレンドのエステル交換反応がブレンド相の均一化に与える影響
井田慎一郎、山本紘子、照沼真衣、伊藤眞義、高分子論文集、66巻, 55-60 (2009).
137 加硫ゴムの伸張変形下におけるESR測定
高木隆一、船津淳司、伊藤眞義、日本ゴム協会誌、81巻, 460-466 (2008).
136 Irreversible Phase Behavior of the Ternary Blends of Poly(ethylene terephthalate)/Poly(ethylene-2,6-naphthalate)/Poly(ethylene terephthalate-co-ethylene-2,6-naphthalate)
Shin-Ichiro Ida, Masayoshi Ito, J. Appl. Polym. Sci., 110, 1814-1821 (2008).
135 加硫ゴムの架橋形態が力学的疲労に与える影響
船津惇司、伊藤眞義、高分子論文集、65巻, 369-374,(2008).
134 ESR Study of Silica Filled SBR with different rubber/filler Interactions
Masayoshi Ito, Hiroyuki Isago, Nozomu Suzuki, J. Appl. Polym. Sci., 108, 1385-1392 (2008).
133 ゴム中におけるシリカの化学反応性
宮内智行、伊藤眞義、高分子論文集、64巻, 779-785, (2007).
132 Phase Control of BR/SBR Blends by Silica Particles
Motoyuki Inai, Seiji Aizawa, Masayoshi Ito, e-J. of Soft Materials, 3, 64-69 (2007).
131 ヒドロシリル化反応で架橋したシリカ充てん液状エチレンプロピレンジエンゴムの機械高度に及ぼすシランカップリング剤の影響
白田孝、千本裕、伊藤眞義、高分子論文集、64巻、245-253 (2007).
130 ヒドロシリル化反応で架橋したエチレンプロピレンジエンゴムの物性
白田孝、菊池義冶、伊藤眞義、高分子論文集、64巻、215-222 (2007).
129 架橋剤の構造がヒドロシリル化反応によるエチレンプロピレンジエンゴムの架橋速度に与える影響
白田孝、柿ヶ野武明、菊池義冶、伊藤眞義、高分子論文集、64巻、204-214 (2007).
128 Solid-State polymerization of Melt-Spun Poly(ethylene terephthalate) Fibers and Their Tensile Properties
Sachiko Nitta, Tomohiro Yamaguchi, Masayoshi Ito, J. Appl. Polym. Sci., 103, 1791-1797 (2007).
127 ヒドロシリル化反応によるエチレンプロピレンジエンゴムの新規架橋反応速度に対するジエン構造の影響
白田孝、柿ヶ野武明、川崎雅昭、菊池義冶、伊藤眞義、高分子論文集、63巻、257-265 (2006)
126 高分子量ナイロン６の静的融点以上における構造とその変形
田島一成、金元哲夫、伊藤眞義、高分子論文集、62巻、533-540 (2005)
125 Chain Scission of Rubber Molecules by a Tensile Force in Filled Rubber Systems
Nozomu Suzuki and Masayoshi Ito, e-Journal of Soft Materials, 1, 1-7 (2005)
124 Effects of Molecular Weight on Phase Structure of Poly(ethylene terephthalate)/Poly(ethylene 2,6-naphthalate) Blends
Mizuho Takahashi, Masayoshi Ito, Shinichiro Ida, Tokimitsu Ikawa, J. of Appl. Polym. Sci., 97, 2428-2438 (2005)
123 Effects of rubber/filler interactions on deformation behavior of silica filled SBR systems
Nozomu Suzuki, Masayoshi Ito and Fumito Yatuyanagi, Polymer, 46, 193-201 (2005).
122 Effects of rubber/filler interactions on the structural development and mechanical properties of NBR/silica composites
Nozomu Suzuki, Masayoshi Ito and Shigeyuki Ono, J. of Appl. Polym. Sci., 95. 74-81(2005)
121 シリカ充てん系ゴム複合材料におけるフィラーゲルとゴムゲル
海上瑠奈、伊藤眞義、小野茂之、日本ゴム協会誌、77巻、375-381 (2004)
120 静的融点以上における高分子量ナイロン６の延伸応力と構造発現の関係
田島一成、金元哲夫、伊藤眞義、高分子論文集、６１巻、346-351 (2004)
119 Relation between ductility and segmental mobility of nylon-6
R. Konishi and M. Ito, Polymer, 45, 5191-5198 (2004)
118 Relationship Between Structure Development and Mechanical Properties for NBR/Silica Compounds
N. Suzuki, M. Ito and S. Ono, Kautschuk Gummi Kunststoffe, 57, 303-309 (2004)
117 高分子量ナイロン６の静的融点以上における延伸挙動
田島 一成、宇賀 恵美子、金元 哲夫、伊藤 眞義、高分子論文集、60卷、636-643 (2003)
116シリカ充てん二トリル−ブタジエンゴムのバウンドラバー発現機構
鈴木 望、早川 葉子、小野 茂之、伊藤 眞義、高分子論文集、60卷、71-77 (2003)
115 NMRによる発泡ゴムの架橋密度決定
伊藤 眞義、金島 加代子、澤登 純一、堀 洋、日本ゴム協会誌、76巻、81-85 (2003)
114 Effects of Surface Chemistry of Silica Particles on Secondary Structure and Tensile Properties of Silica Filled Rubber Systems
N. Suzuki, F. Yatsuyanagi, M. Ito and H. Kaidou, J.of Appl. Polym. Sci., 86, 1622-1629 (2002).
113 超高分子量ポリエチレン重合体粉末の二段固相押出物に発現する構造欠陥
遠田 順、澤井 大輔、金元 哲夫、伊藤 眞義、繊維学会誌、58巻, 262-267 (2002)
112 Effects of Surface Chemistry of Silica Particles on the Mechanical Properties of Silica Filled Styrene-Butadiene Rubber Systems
F. Yatsuyanagi, N. Suzuki, M. Ito and H. Kaidou, Polymer J., 34, 332-339 (2002)
111.Uniaxial orientation and tensile properties of poly(ethylene terephthalate)/ poly(ethylene-2,6-naphthalate) blends
M. Ito, M. Takahashi, T. Kanamoto, Polymer, 43, 3675 (2002)
110.カーボンブラック充てん系ゴム複合材料における不均質構造が貯蔵弾性率に与える効果
八柳 史、伊藤 眞義、海藤 博幸、日本ゴム協会誌、74巻、456 (2001)
109. Effects of secondary structure of fillers on the mechanical properties of silica filled rubber systems
F. Yatsuyanagi, N. Suzuki, M. Ito and H. Kaidou, Polymer, 42, 9523 (2001)
108. Phase structure and deformation behavior of polyester blends
M. Ito, K. Tajima and T. Kanamoto, Polymer, 42, 5885 (2001)
107.Effects of molecular weight on the drawing and the draw efficiency of nylon-6
M. Ito, A. Takahashi, N. Araki and T. Kanamoto, Polymer, 42, 241 (2001)
106.Lamellar Thickening in Nascent Poly(acrylonitrile) upon Annealing
D. Sawai, M. Miyamoto, T. kanamoto and M. Ito, J. of Polym. Sci: Part B: Polym. Physics, 38, 2571 (2000)
105.シラノール基がゴムーシリカのハイブリッド化に与える影響
澤登純一、小野茂之、伊藤眞義、高分子論文集、57巻、356 (2000).
104.Relationship between viscoelastic properties and characteristics of filler-gel in filled rubber system
F. Yatsuyanagi, H. Kaidou, and M. Ito, Rubber Chem. and Technol., 72, 657 (1999)
103.A study of water in hydroxypropyl methylcellulose
J. Nakamura and M. Ito, Rept. Progr. Polym. Phys. Jpn., 42, 241 (1999)
102.Effects of Silanol Groups on the Formation of Bound Rubber in Silica Filled Rubber
S. Ono, J. sawanobori, A. Toda, K. Seki, and M. Ito, Rept. Progr. Polym. Phys. Jpn., 42, 207 (1999)
101.Structure Development in Silica-Filled Polyacrylate Rubber Composites During Mixing
S. Ono, M. Ito, H. Tokumitsu, and K. Seki, J. Appl. Polym. Sci., 74, 2529 (1999).
100.Structure development in silica-filled rubber composites
S. Ono, Y. Kiuchi, J. Sawanobori, and M. Ito, Polymer International, 48, 1035 (1999)
99.カーボンゲルの微細構造解析
木内保太郎、伊藤眞義、日本ゴム協会誌、７２巻、599 (1999)
98.Uniaxial Drawing of Isotactic Poly(acrylonitrile):Development of Oriented Structure and Tensile Properties
D. Sawai, A. Yamane, T. Kameda, T. Kanamoto, M. Ito, H. Yamazaka, and K. Hisatani, Macromolecules, 32, 5622 (1999)
97. NMR Study on the Silica Filled Polyisoprene Composites
S. Ono and M. Ito, Rept. Progr. Poly. Phys. Jpn., 41, 547 (1998)
96.Ultradrawing of Atactic Poly(acrylonitrile)
D. Sawai, A. Yamane, T. Kanamoto, M. Ito and R. S. Porter, Rept. Progr. Polym. Phys. Jpn., 41, 419 (1998)
95.Effects of crystalline forms on the deformation behaviour of nylon-6
M. Ito, K. Mizuochi and T. Kanamoto, POLYMER, 39, 4593 (1998)
94.Development of High Ductility and Tensile Properties by a Two-Stage Draw of Poly(acrylonitrile): Effect of Molecular Weight
D. Sawai, A. Yamane, H. Takahashi, T. Kanamoto, M. Ito and R. S. Porter, J. Polym. Sci. Part B, Polym. Phys., 36, 629 (1998)
93.Solid-state Deformation of β-form Crystals of Poly(ethylene 2,6-naphthalate)
M. Ito, T. Ogura and T. Kanamoto, Rept. Progr. Polym. Phys. Jpn., 40, 285 (1997)
92.Molecular orientation of electrochemically synthesized polythiophene:effects of temperature, solvent and magnetic field
S. Osawa, T. Ogawa, and M. Ito, Synthetic Metals, 90, 109 (1997)
91.Development of High Ductility and Tensile Properties upon Two-Stage Draw of Ultrahigh Molecular Weight Poly(acrylonitrile)
A.Yamane, D. Sawai, T. Kameda, T. Kanamoto, M. Ito and R.S.Porter, Macromolecules, 30, 4170 (1997)
90.Deformation Behavior of Nylon 6 Solution-Grown Crystals
M.Ito, Y.Morishita, K.Mizuochi and T.Kanamoto, J. Macromol. Sci. Phys., B36 367 (1997)
89.ゴムの化学構造と分子量がカーボンゲルの量と構造に与える影響
八柳 史、海藤博幸、木田信虎、伊藤眞義、日ゴム協会誌、70巻、274 (1997)
88.Deformation Behavior of Nylon 12
M. Ito, K.Mizuochi, M.Yamagishi and T.kanamoto, Rept. Progr. Polym. Phys. Jpn., 39, 437 (1996).
87.Effects of Magnetic Field on Chain Orientation of Electrochemically Prepared Polythiophene
S.Osawa, T.Ogawa and M.Ito, Rept. Progr. Polym. Phys. Jpn., 39, 377 (1996).
86.Development of oriented structure during ultradrawing of nascent polyacrylonitrile powder
T.kameda, A.Yamane, T.kanamoto, M.Ito and R.S.Porter, Polymer Science, Ser. A, 38, 737 (1996).
85.Studies on the structure and formation mechanism of carbon gel in the carbon black filled polyisoprene rubber composite
N.Kida, M.Ito, F.Yatsuyanagi and H.Kaido, J. Appl. Polym. Sci., 61, 1345 (1996).
84.Solid-state Coextrusion of Nylon 6 Solution-grown Crystals
M.Ito, Y.Morishita and T.Kanamoto, Rept. Progr. Polym. Phys. Jpn., 38, 327 (1995).
83.塩化リチウムがナイロン６繊維の構造と力学物性に与える効果
伊藤眞義、鈴木健二、金元哲夫、繊維学会誌、51巻、432 (1995).
82. An In-situ Study of Visible Absorption during Electrochemical Polymerization of 3-hexyl- thiophene
S.Osawa, M.Yamahara, H.Yajima, R.Endo and M.Ito, Rept. Progr. Polym.Phys. Jpn., 37, 485 (1994).
81. Drawing Behavior and Electrical Properties of Electrochemically Prepared poly(3- methylthiophene)
S.Osawa, M. Ito and K.Tanaka, Rept. Progr. Polym. Phys. Jpn., 37 375 (1994).
80. Dynamic Mechanical Properties and Thermochromism of Electrochemically Prepared Poly(3- alkylthiophene)s
S.Osawa, M.Ito and K.Tanaka, Rept. Progr. Polym. Phys. Jpn., 37, 371 (1994).
79. Supermolecular Structure and Electrical Properties of Poly(3-alkylthiophene)s
S.Osawa, M.Ito and K.Tanaka, Rept. Progr. Polym. Phys. Jpn., 37, 307 (1994).
78. Chain Orientation of Electrochemically Prepared Polythiophene: Effects of Solvent and Polymerization Temperature
S.Osawa, M.Ito and K.Tanaka, Rept. Progr. Polym. Phys. Jpn., 37, 303 (1994).
77. Crystallization Conditions and Crystalline Transition of Poly(ethylene 2,6-naphthalate)
M.Ito and T.Kanamoto, Rept. Progr. Polym. Phys. Jpn., 37, 193 (1994).
76. 天然ゴム／カーボンブラック系カーボンゲル構造の分子量依存性
八柳 史、海藤博幸、伊藤真義、日本ゴム協会誌、67, 707 (1994).
75. Deformation Mechanism of Amorphous Poly(ethylene terephthalate) as a Function of Molecular Weight and Entanglements
B.Huang, M.Ito and T.Kanamoto, Polymer, 35, 1210 (1994).
74. Effects of Draw Conditions on Deformability and Draw Efficiency of High Molecular Weight Poly(ethylene terephthalate) Fibers
B.Huang, M.Ito and T.Kanamoto, Polymer, 35, 1329 (1994).
73. Uniplanar oriented isotactic polypropylene:3. Properties and morphology
S.Osawa, R.S.Porter and M.Ito, Polymer, 35, 551 (1994).
72. Molecular Weight Dependence on the Bound Rubber Structure in Carbon black Filled Natural Rubber
M.Ito and D.Sato, Rept.Progr.Polym.Phys.Jpn., 36, 479 (1993).
71. Elastic modulus of the crystalline regions of poly(ethylene-2,6-naphthalate)
K.Nakamae, T.Nishino, K.Tada, T.Kanamoto and M.Ito, Polymer, 34, 3322 (1993).
70. Phase Structure of Polyisoprene/Polyvinylbutadiene Blends
M.Ito, J.Takahashi, and K.Yamada, Rept.Progr.Polym.Phys.Jpn., 35, 247 (1992).
69. Two-Stage Drawing of Poly(ethylene 2,6-naphthalate)
M.Ito, K.Honda, and T.Kanamoto, J.Appl.Polym.Sci., 46, 1013 (1992).
68. 超高分子量ポリエチレンテレフタレート繊維の作成と諸性質
伊藤眞義，若山恵英，金元哲夫，繊維学会誌，48, 569 (1992).
67. Effect of pre-drawn morphology induced by treatment with mixtures of dimethylformamide and water on drawing of poly(ethylene terephthalate) fibers
M.Ito, H.Hosoi, and T.Kanamoto, Polymer, 33, 2575 (1992).
66. Effects of Molecular Weight on the Electrical Properties of Electrically Synthesized Poly(3- hexylthiophene)
S.Osawa, M.Ito, S.Iwase, H.Yajima, R.Endo, and K.Tanaka, Polymer, 33, 914 (1992)
65. The Application of Ultrasonic Waves on the Electrochemical Polymerization of Thiophene
S.Osawa, M.Ito, K.Tanaka and J.Kuwano, J.Polym.Sci. Part B, Polym.Phys., 30, 19 (1992)
64. Preparation of Polypyrrole-Porous Glass Composites
J.Kuwano, K.Nagashima, M.Kato and M.Ito, Rept.Progr.Polym.Phys.Jpn., 34, 293 (1991)
63. Solid-state Coextrusion of Poly(ethylene 2,6-naphthalate)
M.Ito, K.Honda and T.Kanamoto, Rept.Progr.Polym.Phys.Jpn., 34, 213 (1991)
62. Drawing of Poly(ethylene terephthalate) Fibers Treated by the Mixtures of Dimethylformamide and Water
M.Ito, H.Hosoi and T.Kanamoto, Rept.Progr.Polym.Phys.Jpn., 33, 307 (1990)
61. Preparation of High Modulus and High Strength Fibers from High Molecular Weight
Poly(ethylene terephthalate)
M.Ito, K.Takahashi and T.kanamoto, J.Appl.Polym.Sci., 40, 1257 (1990)
60. Two-stage Drawing of Acetone Treated Poly(ethylene terephthalate) Fibers
M.Ito, H.Miya, M.Watanabe and T.Kanamoto, J.Appl.Polym.Sci., 40, 543 (1990)
59. Anomalous Electrical Properties of Drawn Polythiophene Films
S.Osawa, M.Ito, R.Endo and K.Tanaka, Polymer Commun., 31, 92 (1990)
58. Effects of Sample Geometry and Draw Conditions on the Mechanical Properties of Drawn Poly(ethylene terephthalate)
M.Ito, K.Takahashi and T.Kanamoto, Polymer, 31, 59 (1990)
57. Drawing Behavior of Poly(ethylene terephthalate) Fibers Treated by Organic Solvents
M.Ito, M.Watanabe and T.Kanamoto, Rept.Progr.Polym.Phys.Jpn., 32, 243 (1989)
56. Detection and the Molecular Orientation in Nonvulcanized and Vulcanized Natural Rubber Compounds by the Low Temperature X-ray Methods
Y.Udagawa and M.Ito, Rubber Chemistry and Technology, 62, 179 (1989)
55. Preparation of High Modulus and Strength Poly(ethylene terephthalate) Fibers
M.Ito, J. of the Mechanical Behaviour of Materials, 1, 269 (1988)
54. Mechanical and Electrical Properties of Drawn Polythiophene Films
S.Osawa, M.Ito, J.Kuwano and K.Tanaka, Rept.Progr. Polym.Phys.Jpn., 31, 309 (1988)
53. Drawing of Acetone Treated Poly(ethylene terephthalate)
M.Ito, H.Miya, T.Kanamoto and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 31, 313 (1988)
52. Morphology and Mechanical Properties of Electochemically Prepared Polythiophene Films
M.Ito, A.Tsuruno, S.Osawa and K.Tanaka, Polymer, 29, 1161 (1988)
51. Effects of Ultrasonic Irradiation on the Electrochemical Polymerization of Thiophene
S.Osawa, M.Ito, K.Tanaka and J.Kuwano, Rept.Progr.Polym.Phys.Jpn., 30, 641 (1987)
50. Polymerization of Methyl Methacrylate on Silica Surface
S.Ono, S.Ichimura, M.Ito and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 30, 645 (1987)
49. Solution Spinning of Poly(ethylene terephthalate)
M.Ito, K.Takahashi,T.Kanamoto and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 30, 333 (1987)
48. Effects of Initial Morphology and Molecular Weight on the Deformability of Poly(ethylene terephthalate)
M.Ito, T.Kanamoto and K.Tanaka, J.Polym.Sci.Part B, Polym.Phys., 25, 2127 (1987)
47. カーボンブラック充填加硫ゴムの熱による高次構造変化
小野茂之、伊藤真義、田中公二、宇田川好隆、日本ゴム協会誌、60巻, 330 (1987)
46. Electrochemical Polymerization of Polythiophene under Ultrasonic Field
S.Osawa, M.Ito, J.Kuwano and K.Tanaka, Synthetic Metals, 18, 145 (1987)
45. 力学的刺激がカーボンブラック充填加硫ゴムの高次構造変化に与える効果
伊藤真義、田中公二、宇田川好隆、日本ゴム協会誌、59巻,39, (1986)
44. Drawn Poly(ethylene terephthalate) Films obtained from Psudo-gel State
M.Ito and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 29, 277 (1986)
43. Drawing of Solution Grown Crystal Mats of poly(ethylene terephthalate)
M.Ito and K.Tanaka, Rept. Progr. Polym.Phys.Jpn., 29, 273 (1986)
42. Effects of Current Density of Electrochemical Polymerization on the Stability of Polythiophene Films
I.Baba, J.Kuwano, M.Kato, M.Ito and K.Tanaka, Denki Kagaku, 54, 716, (1986)
41.The Effects of Initial Crystalline Morphology on the Properties ofDraw Polypropylene
M.Ito and K.Tanaka, Polymer J., 18, 557 (1986)
40. Chain Orientation of Electrically Polymerized Polythiophene Films
M.Ito, H.Shioda and K.Tanaka, J.Polym.Sci.Polym.Letters Ed., 24, 147 (1986)
39. シリカ充填ポリイソプレンの熱処理による高次構造変化
伊藤真義、中村武房、田中公二、日本ゴム協会誌、58巻, 468 (1985)
38. Pulsed NMR Study on the Effects of Initial morphology on the Structure of Drawn
Polypropylene
M.Ito and K.Tanaka, Rept.Progr. Polym.Phys.Jpn., 28, 493 (1985)
37. Effects of Polymerization Condition on the Electrical Properties of Polythiophene
M.Ito, H.Shioda and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 28, 407 (1985)
36. Pulsed NMR Study on the Silica Filled Rubber Systems
M.Ito, T.Nakamura and K.Tanaka, J.Appl.Polym.Sci., 30, 3493 (1985)
35. A Pulsed NMR Study on the Effects of Initial Morphology on the Structure of Extrusion-Drawn Poly(ethylene terephthalate) M.Ito, T.Kanamoto, K.Tanaka and R.S.Porter, J.Polym.Sci.Polym.Phys.Ed., 23, 59 (1985)
34. Drawing of Poly(P-phenylene sulfide) by Solid-State Coextrusion
M.Ito and R.S.Porter, J.Polym.Sci.Polym.Phys.Ed., 23, 245 (1985)
33. Annealing Effects of Filled Rubber Systems(II)
M.Ito, T.Nakamura and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 27, 567 (1984)
32. Solid State Co-extrusion of Single Crystal Mats of Poly(ethylene terephthalate)
M.Ito, T.Kanamoto and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 27, 307 (1984)
31. Pulsed NMR Observation of Ultra-drawn Polypropylene
M.Ito, H.Serizawa K.Tanaka, W.P.Leung and C.L.Choy, J.Polym.Sci.Polym.Phys.Ed., 21, 229 (1983)
30. Annealing Effects of Filled Rubber Systems
T.Nakamura, H.Serizawa, M.Ito K.Tanakaand A.Nomura,Rept.Progr.Polym.Phys.
Jpn., 26, 199 (1983)
29. Pulsed NMR Studies of Solid-State Extruded Poly(ethylene terephthalate)
M.Ito, T.Kanamoto and K.Tanaka, Rept. Progr.Polym.Phys.Jpn., 26, 525 (1983)
28. Thermal Expansivity of Oriented Poly(ethylene terephthalate)
C.L.Choy, M.Ito and R.S.Porter, J.Polym.Sci.Polym.Phys.Ed., 21, 1427 (1983)
27. Surface Modification Effects of Carbon Black on Reinforced Natural Rubber
H.Serizawa, T.Nakamura, M.Ito, K.Tanaka and A.Nomura, Polymer J., 15, 543 (1983)
26. Fourier-Transform Infrared Study of Coextrusion Drawn Poly(ethylene terephthalate)
M.Ito, J.R.C.Pereira, S.L.Hsu and R.S.Porter, J.Polym.Sci.Polym.Phys.Ed., 21, 389 (1983)
25. Effects of Oxidation of Carbon Black Surface on the Properties of Carbon Black-Natural Rubber Systems
H.Serizawa, T.Nakamura, M.Ito, K.Tanaka and A.Nomura, Polymer J., 15, 201 (1983)
24. The Effects of Oxygen Diffusion on the Surface Photooxidation of Polystylene M.Ito and R.S.Porter, J.Appl.Polym.Sci., 27, 4471 (1982)
23. On the Morpholgical Vriation along the Radius of High Density Polyethylene Extrudates
T.Kanamoto, M.Ito, K.Tanaka, K.Ogura and R.S.Porter, Rept.Progr.Polym.Phys.Jpn., 25, 227 (1982)
22. Crystallization and Annealing of α,ω-Polyethylene Dicarboxylc Acids and their Salts A.Izumi, M.Ito, T.Kanamoto, K.Tanaka andK.Ogura,Rept.Progr.Polym.Phys.
Jpn., 25, 217 (1982)
21. Filled Rubber Structures of Oxidized Carbon Black and Natural Rubber System
H.Serizawa, M.Ito, K.Tanaka and A.Nomura, Rept.Progr.Polym.Phys.Jpn., 25, 611 (1982)
20. Molecular Motions in Solid State Extruded Poly(ethylene terephthalate)
M.Ito, T.Kanamoto,H.Serizawa,K.TanakaandR.S.Porter,Rept.Progr.Polym.Phys.Jpn., 25, 399 (1982)
19. Structural Changes during Mechanical Mixing in Carbon black-Natural Rubber Systems Studied by Pulsed NMR
H.Serizawa, M.Ito, T.Kanamoto, K.Tanaka and A.Nomura, Polymer J., 14, 149 (1982)
18.Surface Characterization of Extrusion-Drawn Semicrystalline Poly(ethylene terephthalate) by Multiple Internal Reflection Infrared Spectroscopy
M.Ito, J.R.C.Pereira and R.S.Porter, J.Polym.Sci.Polym.Letters Ed., 20, 61 (1982)
17. Pulsed NMR Studies of Crystalline State Extrusion of High Density Polyethylene M.Ito, T.Kanamoto, K.Tanaka and R.S.Porter,Macromolecules, 14, 1779 (1981)
16. Proton Spin-Spin Relaxation Time in MBBA
M.Ito, K.Fujimura, T,Kanamoto, S.Kondo, K.Tanaka and M.Takeda, Mol.Cryst.Liq.Cryst., 69, 71 (1981)
15. Pulsed NMR Study of the Structural Changes during Mixing in Carbon-Natural Rubber System
H.Serizawa, M.Ito, K.Tanaka and A.Nomura, Rept.Progr.Polym.Phys.Jpn., 24, 509 (1981)
14. Dynamic Mechanical Behavior of Chitin and Chitosan
K.Ogura, T.Kanamoto, M.Ito and K.Tanaka, Polymer Bull., 2, 301 (1980)
13. Dielectric Relaxation in Stretched Polyethylene Suberate
A.Gokan, M.Ito and K.Tanaka, Die Makromol.Chem., 180, 527 (1979)
12. Molecular Motion in Stretched Polyethylene Suberate
A.Gokan, M.Ito and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 21, 319 (1978)
11.The Relationship between Chemical Structure and Viscoelastic Properties
of Linear Aliphatic Polyesters
M.Ito, M.Kubo, A.Tsuruta and K.Tanaka, J.Polym.Sci.Polym.Phys.Ed., 16, 1435 (1978)
10. Pulsed NMR in Linear Aliphatic Polyesters
M.Ito, H.Serizawa and K.Tanaka, Polymer J., 10, 215 (1978)
9. The Degradation of Polyethylene Sebacate
M.Ito, H.Serizawa and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 20, 223 (1977)
8. Effects of Chemical Structure on the Molecular Motion for Some Linear Aliphatic
Polyesters
M.Ito, M.Kubo and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 20, 301 (1977)
7. Proton Spin-Lattice Relaxation in Blends of Natural Rubber and Polyterpene
M.Ito and K.Tanaka, Bull.Chem.Soc.Jpn., 50, 3409 (1977)
6. Dielectric Relaxation in Linear Aliphatic Polyesters
M.Ito, S.Nakatani, A.Gokan and K.Tanaka, J.Polym.Sci.Polym.Phys.Ed., 15,
605 (1977)
5. Thermal Analysis and NMR Observation of 66 Nylon
M.Ito, T.Kanamoto and K.Tanaka, Bull.Chem.Soc.Jpn., 50, 967 (1977)
4. Molecular Motion in Linear Aliphatic Polyesters
S.Nakatani, M.Ito and K.Tanaka, Rept.Progr. Polym.Phys.Jpn., 19, 335 (1976)
3. NMR Observation of Polyethylene Sebacate
M.Ito, S.Nakatani, and K.Tanaka, Rept.Progr.Polym.Phys.Jpn., 19, 463 (1976)
2. Spin-Lattice Relaxation in Nylon 66 and Poly(oxymethylene)
M.Ito, T.Kanamoto and K.Tanaka, J.Polym.Sci.Polym.Letters Ed., 14, 189 (1976)
1. Effects of morphology on the Molecular Motion in 66 Nylon
M.Ito, K.Tanaka and T.Kanamoto, Rept.Progr.Polym.Phys.Jpn., 16, 249 (1973) |
| Review Articles and Chapters in Books |
30 ゴム材料を友とした40年(V)一筋縄ではいかないゴム材料
伊藤眞義、日本ゴム協会誌、87巻、395-401(2014)
29 ゴム材料を友とした40年(IV)ゴム材料は生き物？
伊藤眞義、日本ゴム協会誌、87巻、303-309 (2014)
28 ゴム材料を友とした40年(III)カラフルな自動作用タイヤを作りたい
伊藤眞義、日本ゴム協会誌87巻、187-194 (2014)
27 ゴム材料を友とした40年(II)教科書どおりのカーボンゲルがあった
伊藤眞義、日本ゴム協会誌87巻、48-56 (2014)
26 ゴム材料を友とした40年(I)ゴム材料との出会い
伊藤眞義、日本ゴム協会誌87巻、9-15 (2014)
25 高分子の延伸による構造と配向の発現およびそれらの制御法を利用した材料開発、
伊藤眞義、DVD版、（株）R&D支援センター、2013
24ネットワークポリマーとしてのゴム、伊藤眞義、ネットワークポリマー、33巻、235-241(2012)
23 加硫ゴムの伸長変形下におけるネットワーク構造変化
伊藤眞義、日本ゴム協会誌、83巻、401-406 (2010)
22 ゴム材料の力学的性質
伊藤眞義、フルードパワーシステム、41巻、288-291 (2010)
21 よくわかる最新ゴムの基本と仕組み
伊藤眞義、秀和システム、(2009)
20 Self Re-Construction of Crosslinking System in Polyisoprene Vulcanizates
M. Ito, J. Funatsu, R. Takagi, Kautschuk Gummi Kunststoffe, 219-223, May 2009.
19 ゴムはなぜ伸びる？
伊藤眞義、オーム社、(2007)
18 微粒子／ゴム界面相互作用とゴムマトリックス相における構造破壊の関係
伊藤眞義、鈴木望、接着、４９巻、446-452 (2005)
17 Relationship Between Structure Development and Mechanical Properties for NBR/Silica Compounds
N. Suzuki, M. Ito S. Ono, Kautshuk Gummi Kunststoffe, 303-309, May 2004.
16充てん剤系ゴム複合材料におけるフィラー/ポリマー相互作用
伊藤 眞義、日本ゴム協会誌、76巻、198-203 (2003)
15.PEN:Structure and Properties M. Ito and T. Kikutani, in Handbook of Thermoplastic Polyesters Volume 1,
Ed. by S. Fakirov, Wiley-VCH(2002).
14.充てん剤系ゴム複合材料の不均質構造と力学物性の関係
伊藤 眞義、高分子加工、51, 194 (2002)
13.ゴムと無機・有機材料のハイブリット化、伊藤眞義、有機・無機ハイブリット材料、p72 , 1999 技術情報協会
12. 有機高分子繊維の高性能化
伊藤眞義、SUT Bulletin, 12, 44 (1995).
11. Advanced Fundamentals for Improved Fibers of Poly(ethylene terephthalate)
M.Ito and T.Kanamoto, Polymer News, 19, 244 (1994).
10. ポリエステル繊維の高性能化
伊藤真義、繊維学会誌、50, 591 (1994).
9. ゲル延伸による繊維の高強力・高弾性率化
伊藤真義、化学工業、45, 671 (1994).
8. 固体の変形
金元哲夫、伊藤真義、高分子物性の基礎、P323, 共立出版、(1993).
7. 超音波照射下におけるチオフェンの電解重合
伊藤真義、Ultrasonic Technology, 4, 27 (1992).
6. PETの膨潤延伸技術
伊藤真義, ”PETフイルム”p32, 技術情報協会, (1990)
5. Ultra-Drawing of Some Flexible Chain Polymers
M.Ito, H.Miya, M.Watanabe, T.Anyashiki, T.Nishizawa, K.Takahashi, S.Tsunoda, T.Hoshiba, M.Seki, T.Kanamoto and R.S.Porter, "Polymer Rheology and Processing" edited by A.A.Collyer and L.A.Utracki, p407 Elsevier Science Publishers (1990)
4. 塩化銅(I),(II)水溶液を用いた定比例および倍数比例の法則の確認実験 橘孝二、伊藤真義、小針淳、近藤久義、化学教育、34巻, 61 (1986)
3. 全反射赤外分光法(ATR-IR)による高分子表面の分析
伊藤真義、色材、57巻, 200(1984)
2. Deformation Profiles: Effects of the Properties of High Density Polyethylene Drawn by Solid- State Extrusion
T.Kanamoto, M.Ito, K.Ogura K.Tanaka and R.S.Porter, "Polymer for Fibers and Elastomers" edited by Jett C.Arthur,Jr., 415, ACS Symposium Series 260, 1984
1. 赤外全反射吸収スペクトル法の固体高分子への応用
伊藤真義、理学専攻科雑誌、3巻, 16, (1982) |
|
