DriveRecorder

■Introduction
　This "drive recorder" is an application that instantly transforms into a drive recorder by using the camera function and G sensor function of the terminal.
You can easily use it by simply fixing it with an in-vehicle kit for smartphones.

A 5-minute recording mode has been added as a countermeasure against road rage.
Please note that a lot of memory is required, so recording may end in the middle depending on the image quality and model.

Installation image



Tap the start button to start recording.
Recording will end after about 3 seconds due to impact (or screen touch).
It has been recorded for about 10 seconds, 20 seconds, 30 seconds, 5 minutes (selectable) and about 3 seconds after the impact (or screen touch).
The sensitivity of the impact sensor can be adjusted individually in 15 steps.
You can also select the image size (depending on the device).
However, the smaller the image size, the smoother the playback.
If you uncheck the touch, recording will not end when you touch the screen.

①This is the first screen of the application.

①
■start
②Start button
Tap to start recording.
(There is a dialog display asking if you want to overwrite it.)
Recording will end after about 3 seconds due to impact (or screen touch).
②

■reproduction
③Play button
Tap to play.
Reverse playback and frame advance are possible.
Any image can be saved as a JPG file.
(Click the capture button to save)
③

■Compressed save
④Compressed save button
You can select the compression ratio and save it.
Low → High File size of about 1/3
With the addition of the 5-minute recording mode, it has been changed to work in the background.
④

■Compressed data
⑤Compressed data button
Tap to select and play the data.
Reverse playback and frame advance are possible.
You can set fps with the -button and + button.
To delete the data, press and hold on the list.
⑤

■size
⑥Size selection
You can select the image size (depending on the device).
⑥

■Impact sensor settings
⑦15 levels of sensitivity
Recording ends with a shock, but you can set the sensitivity.
Checkbox
X-axis, Y-axis, Z-axis
　If you uncheck it, you can disable the sensor in that direction.
　Please set according to the situation.

⑦

■in conclusion
Although it is a simple drive recorder, I hope it will be useful.
Depending on the situation, it may not be recorded.